How Does the System Work?

The CoPilot Automatic Alert System uses Radio Frequency (RF) to transmit a signal.  The signal triggers the alarm sound within the key fob. It is a patented use of radio wave communication for this product.

Car Seat CoPilot features a car seat clip sensor that attaches to the straps of your existing car seat. Connect and secure it to communicate with the keyfob. The sensor sets off an alarm if you get more than 10 feet from your vehicle with your child still strapped in.

Does CoPilot require Bluetooth or any other kind of connection?

No. CoPilot serves as an extra level of security, with core technologies that do not rely on Bluetooth, WiFi connectivity, or a smartphone app, indicating that the products should work at all times.

Does the CoPilot Automatic Alert System use an App for a smartphone or tablet?

No, this product does not depend on any App or cell phone coverage for alerting a parent or caregiver that a child is still in the car seat.

What age of a child is appropriate for the CoPilot Automatic Alert System?

The system is for use on an infant/toddler car seat up to the age when a child can possibly unbuckle the car seat on his/her own. Always properly restrain your child and consult your car seat manual for more information.

Where should the CoPilot Seatbelt Clip be installed on an infant/toddler car seat?

Position the Car Seatbelt Clip Sensor below the car seat buckle and always remember to secure BOTH the car seat buckle and the Car Seatbelt Clip. Make sure LOCK HOOK clicks in place every time.

How will I know the system is working?

When the seat belt clip and key fob successfully pair, the seat belt clip’s LED light flashes five times, while the key’s fob LED light turns blue and beeps twice. After installation and pairing between the seat belt clip and key fob, the signal from an unbuckled car seat will automatically trigger the alarm sound once you walk more than 10 feet away from it.

What if the Seatbelt Clip Sensor does not signal the Key Fob to beep when tested?

If unable to pair the seatbelt clip sensor to the alarm on the key fob, it may require an additional charge. Press the STOP button on the key fob. Continue to hold it while plugging in the Micro USB/USB cable into a power charger. Keep holding until you hear a beep. Then release the STOP button. Wait 2 seconds and press STOP again 2 times quickly.  Then press and hold again longer until the key fob beeps. This will indicate it has successfully paired.

Can I leave the CoPilot Seatbelt Clip on the car seat even when my baby is not in it?

Yes, the CoPilot Automatic Alert System is remains installed on the infant/toddler car seat straps. Once your child is removed from it, the Seatbelt clip is unhooked and will not communicate a signal to the key fob alarm.

How will I know when it is time to recharge the battery on the Seatbelt Clip and/or Key Fobs?

A red LED indicator will flash every 2 seconds on the clip sensor, or on a key fob to indicate that the component needs to have its battery recharged. It is recommended to keep 1 of 2 key fobs charged at all times.

How do you recharge the built-in battery on the Seatbelt Clip and Key Fob?

Both components have a micro USB port. The system comes with (2) micro USB cables. If your vehicle has a USB charging port, simply connect to it.  You can also detach the seatbelt clip and charge it and the key fobs using a USB universal wall adapter (not included with the system) to recharge in your home.

Can I buy just the Seatbelt Clip if I have twins?

Yes, we offer additional and replacement seat belt clips and key fobs. We also offer a Twin Pack, for twins or two children under 3.

Can the Car seat CoPilot Automatic Alert System be used as an extra strap/seatbelt?

Yes, the Car seat CoPilot Automatic Alert System is an extra clip and is NOT a replacement.